Router Bits
Brand: PRO-TECH
MPN: KP370021
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
6,35 mm shank (shaft) that will fit most small or large routers. Please
ensure that you select a router bit with a shank (shaft) size that will fit
into your router collet.
PRO-TECH
rout..
N$ 712.77
Ex VAT:N$ 619.80
Brand: PRO-TECH
MPN: KP3701
Edge
profile router bits
Ogee & Fillet profile
Carbide
Tipped
The ogee and fillet profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape.
Adding to the depth of cut a fillet (bead) will be produced.
An extra bead over the bottom corner is possible when replacing the guide bearing with a smaller size (KP100 3-8).
This router bit has a
6.35 mm shank (shaft) that will fit most s..
N$ 862.50
Ex VAT:N$ 750.00
Brand: PRO-TECH
MPN: KP3702
Edge
profile router bits
Ogee & Fillet profile
Carbide
Tipped
The ogee and fillet profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a convex and concave shape.
Adding to the depth of cut a fillet (bead) will be produced.
An extra bead over the bottom corner is possible when replacing the guide bearing with a smaller size (KP100 3-8).
This router bit has a
12.7 mm shank (shaft) that will fit most l..
N$ 971.87
Ex VAT:N$ 845.10
Brand: PRO-TECH
MPN: KP370451
Internal
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
12,7 mm shank (shaft) that will fit most large routers.
Please ensure that you select a router bit with a shank (shaft) size that will
fit into your router collet.
PRO-TECH
router bits are m..
N$ 902.06
Ex VAT:N$ 784.40
Brand: PRO-TECH
MPN: KP372451
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
12,7 mm shank (shaft) that will fit most large routers. Please
ensure that you select a router bit with a shank (shaft) size that will fit
into you..
N$ 936.45
Ex VAT:N$ 814.30
Brand: PRO-TECH
MPN: KP372461
Half Round
Bull Nose Bit
Carbide
Tipped
This
router bit is used for creating a convex shaped profile on the side of the workpiece
in one pass producing a perfect half radius bull nose profile
Design helps minimize kickback
Smooth edge requires little or no sanding before applying finish
This router bit has a
12,7 mm shank (shaft) that will fit most large routers. Please
ensure that you select a router bit with a shank (shaft) size that will fit
into you..
N$ 1,132.81
Ex VAT:N$ 985.05
Brand: PRO-TECH
MPN: KP3801
Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A typical..
N$ 1,104.92
Ex VAT:N$ 960.80
Brand: PRO-TECH
MPN: KP387
Cove Panel Raiser router bit
Decorative profile
The raised panel is captured in a groove made in the inside edge of the frame
members. Panels are made slightly smaller than the available space within the
frame to provide room for movement. Wood will expand and contract across the
grain, and a wide panel made of solid wood could change width by up to 6mm,
warping the door frame.
By allowing the wood panel to float, it can expand and contract without
damaging the door. A ty..
N$ 1,196.52
Ex VAT:N$ 1,040.45
Brand: PRO-TECH
MPN: KP3901
Edge
profile router bits
Wavy Edge profile
Carbide
Tipped
The wavy edge profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a wavy edged profile in wood.
Adding to the depth of cut a fillet (bead) will be produced.
An extra bead over the bottom corner is possible when replacing the guide bearing with a smaller size (KP100 3-8).
This router bit has a
6.35 mm shank (shaft) that will fit most small or ..
N$ 850.94
Ex VAT:N$ 739.95
Brand: PRO-TECH
MPN: KP3902
Edge
profile router bits
Wavy Edge profile
Carbide
Tipped
The wavy edge profile router bit is designed for creating decorative mouldings or edge profiles. This cutter allows one to shape a wavy edged profile in wood.
Adding to the depth of cut a fillet (bead) will be produced.
An extra bead over the bottom corner is possible when replacing the guide bearing with a smaller size (KP100 3-8).
This router bit has a
12.7mm shank (shaft) that will fit most large rout..
N$ 850.94
Ex VAT:N$ 739.95
Brand: PRO-TECH
MPN: KP3MM
Single
flute Straight bit
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revolution yield a smoot..
N$ 130.41
Ex VAT:N$ 113.40
Brand: PRO-TECH
MPN: KP3MM-2
Double
flute Straight bit
Solid
Carbide
In
choosing a straight bit for any application, always select one with the shortest
cutting edges and the shortest overall length that will reach the required cut depth.
Excessive length intensifies deflection and vibration, which degrade cut quality
and lead to tool breakage.
Use
a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating
vibration that degrades the cut finish.
Two cuts per revoluti..
N$ 341.26
Ex VAT:N$ 296.75